Below is a list of common issues or questions people have run into.

BLF light is not updating when changing items like DND or Follow Me-1

The BLF light is controlled by a daemon that runs on the PBX. To see if daemon is running, run the command below from your Linux CLI:

/etc/init.d/restapps status

[root@mypbx ~]# /etc/init.d/restapps status
restapps.php (pid  23665) is running...
[root@mypbx ~]#

 

As we can see in the above example, the daemon is running. If it was down, it would show:

[root@mypbx ~]# /etc/init.d/restapps status
restapps.php is stopped
[root@mypbx ~]#

 

To restart the daemon, run the following command:

/etc/init.d/restapps start

[root@mypbx ~]# /etc/init.d/restapps start
Starting REST applications daemon:                         [  OK  ]
[root@mypbx ~]#

BLF light is not updating when changing items like DND or Follow Me-2

Make sure you have enabled Custom DevState hints. Log into your PBX GUI and navigate to the Advanced Settings module:

At the top, under the Advanced Settings Details section, set Display Readonly Settings and Override Readonly Settings to "Yes":

Message Bar on screen not updating when changing items like DND or Follow Me

The Message Bar is controlled by a daemon that runs on the PBX. To see if daemon is running, run the command below from your Linux CLI:

/etc/init.d/restapps status

[root@mypbx ~]# /etc/init.d/restapps status
restapps.php (pid  23665) is running...
[root@mypbx ~]#

 

As we can see in the above example, the daemon is running. If it was down, it would show:

[root@mypbx ~]# /etc/init.d/restapps status
restapps.php is stopped
[root@mypbx ~]#

 

To restart the daemon, run the following command:

/etc/init.d/restapps start

[root@mypbx ~]# /etc/init.d/restapps start
Starting REST applications daemon:                         [  OK  ]
[root@mypbx ~]#

 

Pressing button on phone is not launching application