Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

    • Set the following options:
      • Management Transfer Protocol - HTTP or HTTPS.  HTTPS is preferred, but requires additional configuration on the PBX. (Note that to obtain the HTTP Management passwords with FreePBX as described below requires the SysAdmin Pro commercial module, which is included with PBXact. Also, this is not needed if you only use EndPoint Manager to configure the phone).
      • HTTP Management username - The username from Sysadmin > Provisioning Protocols
      • HTTP Management password - The password from Sysadmin > Provisioning Protocols
      • Configuration File Download - "Base Specific File"
      • Configuration Service Address - The IP address and port of your PBX provisioning service.  e.g. 192.168.0.35:83 84 or 192.168.0.35:1443
      • Leave all other configuration options at their default values.

...