PBX GUI
Page tree

Versions Compared

Old Version 32

changes.mady.by.user Mike Schilleman

Saved on

compared with

New Version Current

changes.mady.by.user Mike Schilleman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. With the device connected via Ethernet cable, click on the link below to download and install the free GSurf_Pro software from the Grandstream website.
  2. Click the “Search” button and the detected devices will appear in the Output field.
    Image Added

  3. The IP Address for this device will display in the IP column.

How to Find the MAC Address

  1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page.
    Image Added
  2. From the home page, click on “Configuration” at the bottom left. The default username is “admin” and the default password is “admin."
    Image Added

    Image Added
  3. Under Basic Settings on the left, click “Status."
    Image Added
  4. The MAC Address will display under Network Status.
    Image Added

How to Set the Configuration Server

  1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page.  
    Image Added
  2. From the home page, click on “Configuration” at the bottom left. The default username is “admin” and the default password is “admin." 
    Image Added 

    Image Added
  3. Under Advanced Settings on the left, click “Maintenance."
    Image Added
  4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX. Generally this would be the IP Address such as 10.10.0.1, used in our example. Press the “Save” button at the bottom.
    Image Added

How to Restore to Factory Default

  1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page.  
    Image Added
  2. From the home page, click on “Configuration” at the bottom left. The default username is “admin” and the default password is “admin."  
    Image Added

    Image Added
  3. Under Advanced Settings on the left, click “Maintenance."
    Image Added
  4. Then under Restore the device, press the “Restore” button.
    Image Added
  5. The device is now reset to factory default.