PBX GUI
Page tree

Versions Compared

Old Version 16

changes.mady.by.user Mike Schilleman

Saved on

compared with

New Version Current

changes.mady.by.user Mike Schilleman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the Test/Reset switch while the unit beeps after one second and all indicator lights on the front of the unit come on.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.

...

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, you should see the MAC Address under “Current Settings.”
    Image Added

How to Set the Configuration Server

  1. Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
    Image Added

  2. Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
    Image Added

  3. Fill in the following information:
    1. Enable Autoprovisioning - Check the box
    2. Get Autoprovisioning from DHCP - Check the box

    3. Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1

    Image Added

  4. Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
    Image Added

How to Restore to Factory Default

  1. Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
    Image Added

  2. Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.