Search

Help

Page 11 of 165. Showing 1,647 results (0.044 seconds)

  1. RADIUS Attribute - NAS Port

    As per RFC 2865 This Attribute indicates the physical port number of the NAS which is authenticating the user. It is only used in AccessRequest packets. Note that this is using "port" in its sense of a physical connection on the NAS, not in the sense of a TCP or UDP port number. Either NASPort or NASPortType (61
  2. SIP_for_NCC_API_Dev_Manual.pdf

    to be valid. general.numOutboundOnly Integer 0 Number of outbound only channels. general.numPorts Integer 256 Specifies how many SIP ports the server supports … . outProxy.hostName String Hostname where the outbound proxy resides. For example, sipproxy.company.com. outProxy.port Integer 5060 Port for the outbound proxy
  3. Outbound calls are not maturing on the Vega FXO gateway on seizing the port

    Problem Outbound calls are not maturing on the vega FXO gateway on seizing the port Solution Provide steps that the user can take to solve the problem. For example "The level 7 printer will flash red when it is out of paper. Add paper to tray 1". This document describe on resolving the issue where in the FXO port gets
    Vega Gateways17 Feb , 2017
  4. IMG 1010 - RADIUS - NAS-Port-Type

    Radius Attribute: NASPortType As Per RFC 2865: This Attribute indicates the type of the physical port of the NAS which is authenticating the user. It can … in an AccessRequest packet, if the NAS differentiates among its ports. A summary of the NASPortType Attribute format is shown below. The fields are transmitted
  5. IMG 1010 - Starting AdminManager on an Alternate Port

    AdminManager listens for ClientView connections on port 1099, which is the default port for Java RMI applications. If this port is already in use by another application, you can configure AdminManager to listen on an alternate port. To do so, Admin Manager must be launched manually from the command line. For Windows
  6. RADIUS Attribute - NAS-Port-Type

    As Per RFC 2865 This Attribute indicates the type of the physical port of the NAS which is authenticating the user. It can be used instead of or in addition … , if the NAS differentiates among its ports. A summary of the NASPortType Attribute format is shown below. The fields are transmitted from left to right
  7. Phone PC Port Documentation

    Documentation listing the capabilities for the Phone PC port in Sangoma phones. Should include any configuration steps needed.
    FreePBX Documentation11 Oct , 2019
  8. RTP Source Port Validate

    2020 employs the RTP Source Port Validate method which examines the IP address and the UDP port of the incoming RTP packet to ensure the packet came from … the invalid RTP packets. The Source Port Validate Method is configured through the Web GUI and by default set to enabled. Configuration The RTP Source Port
  9. How to enable port mirroring / snooping

    trace, but can be configured to mirror the signalling (for SIP/H323) and data (for RTP) ports that can be useful when debugging live systems. Procedure To enable port snooping, go to the "Advanced Debug" menu in the CLI interface by pressing "d" at the main menu and using the username "admin" and password "password
  10. Dynamic Port Configuration

    to restart all panpipe ports (or driver). This is very important during Asterisk, FreeSWITCH or Custom Application debugging when wanpipe restart is not an option … wanpipe reconfiguration and wanpipe port restart. In order to dynamically configure a port into a digial loopback mode Set port into MASTER (internal oscillator
    Telephony Cards03 Jan , 2016