Search

Help

Page 1 of 132. Showing 1,316 results (0.03 seconds)

  1. IMG 1010 - Physical Port Configuration

    Description: The Physical Port Configuration object is created under the Network Interfaces object in ClientView. Use this pane to configure the Interface Mode for each port on the rear panel of the IMG. The ports on the rear panel of the IMG default to 10/100 Mb/s with AutoNegotiation setup. ClientView allows you
  2. How to Port to SIPStation

    Welcome to our complete guide to SIPStation number porting. We are glad that you are considering bringing your number(s) to SIPStation and we look forward to serving you. This wiki is for customers who would like to port phone numbers in to SIPStation from another service provider. If you are looking to port numbers
    SIPStation and FAXStation09 Dec , 2019
  3. IMG 1010 - RTP Source Port Validate

    problems. The IMG uses the RTP Source Port Validate Method to examine the the IP address and the UDP port of the incoming RTP packet to ensure that the packet … will drop the invalid RTP packets. Configure Source Port Validate Method in ClientView. It is enabled by default. The RTP Source Port Validate feature
  4. Port your number out of Google Voice

    supported SIP Trunking service. Porting a Google Voice number to SIPStation is easy as long as you follow the instructions below to unlock your number. Your Google Voice number is automatically locked to prevent it from being ported out without your consent. Before you can port your Google Voice number to another service
    SIPStation and FAXStation09 Dec , 2019
  5. IMG 1010 - RADIUS - NAS-Port

    Radius Attribute: NASPort As per RFC 2865: This Attribute indicates the physical port number of the NAS which is authenticating the user. It is only used in AccessRequest packets. Note that this is using "port" in its sense of a physical connection on the NAS, not in the sense of a TCP or UDP port number. Either
  6. RADIUS Attribute - NAS Port

    As per RFC 2865 This Attribute indicates the physical port number of the NAS which is authenticating the user. It is only used in AccessRequest packets. Note that this is using "port" in its sense of a physical connection on the NAS, not in the sense of a TCP or UDP port number. Either NASPort or NASPortType (61
  7. IMG 1010 - RADIUS - NAS-Port-Type

    Radius Attribute: NASPortType As Per RFC 2865: This Attribute indicates the type of the physical port of the NAS which is authenticating the user. It can … in an AccessRequest packet, if the NAS differentiates among its ports. A summary of the NASPortType Attribute format is shown below. The fields are transmitted
  8. IMG 1010 - Starting AdminManager on an Alternate Port

    AdminManager listens for ClientView connections on port 1099, which is the default port for Java RMI applications. If this port is already in use by another application, you can configure AdminManager to listen on an alternate port. To do so, Admin Manager must be launched manually from the command line. For Windows
  9. RADIUS Attribute - NAS-Port-Type

    As Per RFC 2865 This Attribute indicates the type of the physical port of the NAS which is authenticating the user. It can be used instead of or in addition … , if the NAS differentiates among its ports. A summary of the NASPortType Attribute format is shown below. The fields are transmitted from left to right
  10. Phone PC Port Documentation

    Documentation listing the capabilities for the Phone PC port in Sangoma phones. Should include any configuration steps needed.
    FreePBX Documentation11 Oct , 2019