Search

Help

Page 1 of 133. Showing 1,327 results (0.031 seconds)

  1. How to Port to SIPStation

    Welcome to our complete guide to SIPStation number porting. We are glad that you are considering bringing your number(s) to SIPStation and we look forward to serving you. This wiki is for customers who would like to port phone numbers in to SIPStation from another service provider. If you are looking to port numbers
    SIPStation and FAXStation17 Jun , 2020
  2. How to enable port mirroring - snooping

    trace, but can be configured to mirror the signalling (for SIP/H323) and data (for RTP) ports that can be useful when debugging live systems. Procedure To enable port snooping, go to the "Advanced Debug" menu in the CLI interface by pressing "d" at the main menu and using the username "admin" and password "password
  3. IMG 1010 - Physical Port Configuration

    Description: The Physical Port Configuration object is created under the Network Interfaces object in ClientView. Use this pane to configure the Interface Mode for each port on the rear panel of the IMG. The ports on the rear panel of the IMG default to 10/100 Mb/s with AutoNegotiation setup. ClientView allows you
  4. IMG 1010 - RADIUS - NAS-Port

    Radius Attribute: NASPort As per RFC 2865: This Attribute indicates the physical port number of the NAS which is authenticating the user. It is only used in AccessRequest packets. Note that this is using "port" in its sense of a physical connection on the NAS, not in the sense of a TCP or UDP port number. Either
  5. RTP Source Port Validate

    2020 employs the RTP Source Port Validate method which examines the IP address and the UDP port of the incoming RTP packet to ensure the packet came from … the invalid RTP packets. The Source Port Validate Method is configured through the Web GUI and by default set to enabled. Configuration The RTP Source Port
  6. System Admin - Port Management

    Overview This page allows you to set port numbers for increased security. Logging in On the top menu click Admin In the drop down click System Admin In the right side navigation box click Port Management Settings image20183962921.png Port Default Port Function Admin 80 Web port controlling the system UCP 81 User
    PBX GUI08 Mar , 2018
  7. RADIUS Attribute - NAS Port

    As per RFC 2865 This Attribute indicates the physical port number of the NAS which is authenticating the user. It is only used in AccessRequest packets. Note that this is using "port" in its sense of a physical connection on the NAS, not in the sense of a TCP or UDP port number. Either NASPort or NASPortType (61
  8. IMG 1010 - RTP Source Port Validate

    problems. The IMG uses the RTP Source Port Validate Method to examine the the IP address and the UDP port of the incoming RTP packet to ensure that the packet … will drop the invalid RTP packets. Configure Source Port Validate Method in ClientView. It is enabled by default. The RTP Source Port Validate feature
  9. Port your number out of Google Voice

    supported SIP Trunking service. Porting a Google Voice number to SIPStation is easy as long as you follow the instructions below to unlock your number. Your Google Voice number is automatically locked to prevent it from being ported out without your consent. Before you can port your Google Voice number to another service
    SIPStation and FAXStation09 Dec , 2019
  10. IMG 1010 - RADIUS - NAS-Port-Type

    Radius Attribute: NASPortType As Per RFC 2865: This Attribute indicates the type of the physical port of the NAS which is authenticating the user. It can … in an AccessRequest packet, if the NAS differentiates among its ports. A summary of the NASPortType Attribute format is shown below. The fields are transmitted