- Download the FreePBX 15 Distro from the download page at https://www.freepbx.org/downloads/
Note: FreePBX 15 will turn into PBXact 15 once a PBXact deployment is activated.
- Follow the instructions for installing the PBX Distro outlined on this page Installing FreePBX Official Distro
Once the install process is complete, locate your Deployment ID number from the Sangoma Portal or from your Invoice, and issue the following command:
fwconsole sysadmin activate XXXX (Replacing XXXX with your deployment ID)
- The activation process will install additional RPMs, and make the necessary changes to the GUI behind the scenes. The end result is a complete new PBXact system. This process takes about 3-4 minutes.
- When completed you can run the following End of Line testing and all checks should come back Passed. If you have any failed checks wait 5 minutes and run again. If you still have failed checks please open a support ticket here.
fwconsole sa eol
If you get same FAILED here , run
fwconsole ma installlocal ; fwconsole ma upgradeall ; fwconsole reload
Wait 1-2 mins and run the End of Line test and it should now show PBXact and all passed
fwconsole sa eol