Panasonic KX-TGP500
How to Find the IP Address
- Press the “Menu” button on a handset (Center Joystick).
- Press the following key presses on the keypad ([#][5][3][4]).
- Select "On" for "Embedded web" [SAVE].
- Now to view the IP Address press the “Menu” button on a handset (center of joystick).
How to Find the MAC Address
- First log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Click on “Network Status” option on the left side.
- The MAC address will be displayed like below.
How to Set the Configuration Server
- First log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Next select the “Maintenance” tab at the top right.
- Next select the “Provisioning Maintenance” tab.
- You can now specify the provisioning server information. In our example we are using tftp://10.10.0.1/Config{MAC}.cfg
How to Restore to Factory Default
- First log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Next select the “Maintenance” Tab at the top right.
- Now use the left navigation menu to select “Reset To Defaults."
- Finally click “Reset Web Settings” to complete the reset.
Panasonic KX-TGP550
How to Find the IP Address
- Press the “Menu” button.
- Scroll to “IP Service” and press the “Select” button.
- Scroll to “Network Setting” and press the “Select” button.
- Scroll to “IP Setting” and press the “Select” button.
- The IP address will be displayed.
How to Find the MAC Address
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Click on “Network Status” option on the left side.
- The MAC Address will be displayed like below.
How to Set the Configuration Server
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Select the “Maintenance” tab at the top right.
- Next select “Provisioning Maintenance."
- You can now specify the provisioning server information. In our example we are using tftp://10.10.0.1/Config{MAC}.cfg (Reference the screen above.)
How to Restore to Factory Default
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Next select the “Maintenance” tab at the top right.
- Now select “Reset to Defaults” on the left navigation menu.
- Finally click the “Reset Web Settings” button to complete the reset.
Panasonic KX-UT13X
How to Find the IP & MAC Addresses
- Press the “Setting” button.
- Select “Information Display."
- Scroll down to see either the IP or MAC Address.
How to Set the Configuration Server
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Select the “Maintenance” tab at the top right.
- Next select “Provisioning Maintenance."
- You can now specify the provisioning server information. In our example we are using tftp://10.10.0.1/Config{MAC}.cfg (Reference the screen above.)
How to Restore to Factory Default
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Next select the “Maintenance” tab at the top right.
- Now select “Reset to Defaults” on the left navigation menu.
- Finally click the “Reset Web Settings” button to complete the reset.
Panasonic KX-UT670
How to Find the IP & MAC Addresses
- Press the “Menu” button.
- Press the “Settings” button.
- Scroll down and press the “About Phone” option.
- Select the “Status” option.
- The IP and MAC Addresses will display here.
How to Set the Configuration Server
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Select the “Maintenance” tab at the top right.
- Next select “Provisioning Maintenance."
- You can now specify the provisioning server information. In our example we are using tftp://10.10.0.1/Config{MAC}.cfg
How to Restore to Factory Default
- Log into the Web Admin GUI of the phone. The password is "adminpass" by default.
- Next select the “Maintenance” tab at the top right.
- Now select “Reset to Defaults” on the left navigation menu.
- Finally click the “OK” button to complete the reset.
