Page tree
Skip to end of metadata
Go to start of metadata

Setting FTP Port Value between GCEMS and ClientView

 

Upon initialization, the GCEMS sends configuration data to the ClientView using FTP. The TCP port range for the FTP transfers can be set using the Defaults file.

The Defaults file is stored under the  /opt/dialogic/IMG/GateControlEMS directory on the GCEMS system.

The following settings are set by default for the TCP port range:

FTP_PASSIVE_CHANNEL_PORT:50000
FTP_PASSIVE_CHANNEL_PORT_RANGE:20

This would open the FTP data port between 50000 and 50019.

 

  • No labels