D500 Media transcoding

    1. Introduction
    2. Sangoma Transcoding Release Download and Extract
    3. Sangoma Transcoding API 
    4. Media Transcoding Webinar Archive
    5. Media Transcoding Capacity
    6. Known Issues

    Linux

    1. Transcoder release installation
      -> For Single Server install
      -> For Distributed System install 
    2. Sangoma Media Gateway (SMG) installation
      -> For Single Server Install 
    3. Transcoder Performance Test Application
    4. Firmware Update Instructions
    5. FAQ 
       

    Windows

    1. Windows Installation

     


    Introduction

    The D500 Series card is the industry's first high density affordable PCI Express voice transcoding card designed for optimum voice quality for low to high density systems, offering from 400 to 2000 transcoding sessions (2-legged calls) in one compact 2U form factor! 

    • Card is Ethernet based
    • system will recognize it as a Broadcom BCM5723 ethernet device.
          --> Linux: Broadcom driver tg3
       
    • Has been designed with a general SNGTC API interface that can be used to develop transcoding applications
    • All media to and from the D500 card will be carried via RTP/IP
    • Codec licenses are fully upgradable
    • Works with Asterisk & FreeSWITCH as a codec module
    • Supports the following codecs (G729 is fully indemnified- no need to pay extra):

      Codec P time (ms) Codec P time (ms)
      G711 ulaw  10,20,30,40,50ms (64 kbps/8 Khz) G722   10,20,30,40ms (64 kbps/8 khz)
      G711 alaw  10,20,30,40,50ms (64 kbps/8 Khz) GSM_FR 20 ms (13 kbps/8Khz)
      L16 linear  10,20,30,40,50ms (128 kbps/8Khz)
      10,20,30,40,50ms (256 kbps/16Khz)
      GSM_EFR 20ms
      G729 AB 10-200ms (8 kbps/8 Khz) ILBC  20,40,60ms (15.2kbps/8Khz)
      30,60ms (13.3kbps/8Khz)
      G723.1 30,60,90ms (5.3kbps/8Khz)
      30,60,90ms (6.3kbps/8khz)
      G726 10,20,30,40,50ms (32kbps/8Khz)
      G722.1 (Siren 7) 20ms (24kbps/16Khz)
      20ms (32kbps/16Khz)
      AMR

      20,40ms (4.75kbps/8Khz)
      20,40ms (5.15kbps/8Khz)
      20,40ms (5.90kbps/8Khz)


       

     Known Issues

    •  Asterisk codec module not supported for Asterisk 1.2 
    • Broadcom has released a new ethernet tg3 driver for the D500 PCIe card
      that fixes a lot of  issues on new servers.
    • It is highly recommended to install this driver before proceeding with sngtc installation.
      Download -- tg3-3.112d.tar.gz
      --