Free Whitepapers

Appliance

    Specifications

    • Industrial grade telecom appliance
    • Size: 1U - 19'' Rackmount 
    • Power: AC
    • Depth: 20''
    • Weight: 36lb

      

    Appliance Description

    Front

    Lync_Express_Front_commented.jpg

    Description from Left to Right 

    • Power Led
    • Ethernet Activity Led
    • Power/Reboot button
    • Hot-Swap removable RAID1 hard drives

    Back

    Lync_Express_Rear_commented.jpg

    Description from Left to Right 

    • Power Button
    • Internal AC Power supply
    • Fan
    • PSTN Interfaces
      • PRI 1
      • FXS 1 to 4
    • Primary Signalling Gig Ethernet Port
      • This adapter must be plugged into the LAN
      • SIP Signalling will flow through this device.
      • WebUI identifies this device as "eth0"
    • Secondary/Monitoring Gig Ethernet Port
      • This adapter is optional
      • It can be used for Monitoring and Statistics
      • WebUI identifies this device as "eth1"
    • USB Ports
      • Used to re-flash the appliance
      • Future use: active/standby redundancy

    Power on the appliance

    To power on the appliance:

    1. Set rear power button to "ON" position ("I" side of the button is flush with the appliance)   
    2. Push and hold front power button until the power led turns on.

    Power off the appliance

    To power off the appliance:

    1. Push front power button, hold 1 second and release the button to initiate grace full shutdown
    2. Wait until power led turns off (should take less than 1 minute)

    Force Power off the appliance

    To force power off the appliance:

    1. Push front power button and hold until power led turns off (should be 5 seconds)