Free Whitepapers

T3Mux M13 Multiplexer

     

    1. Introduction
    2. User Manual
    3. Technical Specs
    4. T3Mux & 4xA108

    t3.jpg

     

    Introduction


    Introducing Sangoma's new M13 multiplexer that can rearrange a DS3 framing signal into 28 T1 framing. Sangoma offers this cost-effective and reliable solution, consistent with the quality and affordability of its other product families.


     T3Mux_Overview_Diagram_r2.jpg 

    A DS3 will reduce overall expenses and control costs by combining data and voice applications over one circuit. The benefits can be reaped as soon as you subscribe to more than 8 T1 circuits simultaneously. 

    The T3Mux offers a simplified and user-friendly management console accessible via Ethernet or RS232. It features a VT100 terminal interface for system manage-ment, DS1 and DS3 Interface configuration.

    • DS3 Interface via BNC Coax
    • T1 Interface via RJ-45 Connectors
    • Simple Console Management Configuration via Ethernet and RS232 Interface
    • M13 and C-bit signalling support
    • External DS3 clock option
    • B8ZS and AMI DS1 signalling support
    • Industry standard CSU and NIU loopback codes
    • Requires only 10W from external power adapter

     


    T3Mux RJ45 Connector Specs
     

    • T3Mux contains 14 RJ45 Ports, and each carries 2 T1 lines.  Total 28T1 lines
    • First 4 wires of RJ45 connector are used for 1st T1 port and second 4 wires of RJ45 connector are used for 2nd T1 port.
    • For each RJ45 connector the T1 ports mappings are:
       Port: [01,02] [03,04] [05,06] [07,08] [09,10] [11,12] [13,14] 
                [15,16] [17,18] [19,20] [21,22] [23,24] [25,26] [27,28]