B601 T1/E1/J1 + 4 FXO + 1 FXS

Introduction

• 1 port of T1/E1/J1, 4 ports of FXO and 1 Port of FXS
•  Single FXS port designed for optimum fax support
• Supports Asterisk^®, FreeSwitch^™as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
• Line Protocol Support: Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC
• uses Wanpipe Driver which includes a suite of configuration, operation and debugging utilities

Wanpipe Driver Download
------

-> Linux: Wanpipe Driver

-> Windows: Wanpipe Driver

Installation and Configuration

Linux:     -> Asterisk
               -> FreeSWITCH
               -> API support: Voice API, Wan IP, Multi-Link PPP, HDLC, X25
               -> Netborder

Windows: -> Installation: Netborder
                    Configuration

Hardware Configuration

The B601 has 3 RJ11 connectors for FXO/FXS, and 1 RJ45 for T1/E1/J1.  There are two lines in each RJ11 connector, only 1 for the FXS port. The first line is on the inner pair and the second line is on the outer pair (inner pair for FXS port).

The FXO ports light up RED, and FXS ports light up GREEN

RJ45 T1/E1 Pinouts

Analog Pinouts

-> RJ-45 Description
-> T1 Straight Thru Cable
-> T1 Cross-over Cable
-> T1 Loop Back Plug

Firmware Update

-> Linux: Firmware update

-> Windows: Firmware Update