Sangoma Transcoding Auto Configuration

This step will auto detect all configured D100 cards and will create Asterisk and/or FreeSWITCH codec module configuration files. The utility is used to configure is called "sngtc_cfg".

This utility will probe all the ethernet interfaces looking for transcoding modules. Be aware it will attempt to bring up all interfaces in the system in order to transmit some special ethernet frames
to discover transcoding modules. It will then ask for configuration for each interface where transcoding modules were detected.

1. Asterisk Sangoma Transcoding Configuration: 
   --> sngtc_cfg --server --asterisk 
   or
   --> sngtc_cfg --server --asterisk --astdir=/etc/asterisk
   
   Asterisk Sangoma Transcoding Config file:         
   /etc/asterisk/sangoma_codec.conf
   
   
2. FreeSWITCH Sangoma Transcoding Configuration: 
   --> sngtc_cfg --server --freeswitch  
   or
   --> sngtc_cfg --server --freeswitch  --fsdir=/usr/local/freeswitch/conf/autoload_configs
   
   FreeSwitch Sangoma Transcoding Config file:  
   /usr/local/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml