A104 Quad Voice and Data Card

Introduction Wanpipe Driver Download Installation & Configuration Physical Port Detection RJ45 T1/E1 Pinouts Firmware update

-> View Demo -> Technical spec

 

---

 

Introduction

 

• Four ports of optimized voice and data over T1, E1, and J1 available with Telco-grade hardware echo cancellation.
• The A104 supports up to 120 voice calls or 8.192 Mbps of full–duplex data throughput over four T1, E1, or J1 lines.
• Supports Asterisk^®, FreeSwitch^™as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
• Line Protocol Support: Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC
• uses Wanpipe Driver which includes a suite of configuration, operation and debugging utilities

---

Wanpipe Driver Download
------

-> Linux: Wanpipe Driver

-> Windows: Wanpipe Driver

---

Installation and Configuration

 

Linux:     -> Asterisk
               -> FreeSWITCH
               -> API support: Voice API, Wan IP, Multi-Link PPP, HDLC, X25
               -> Netborder

Windows: -> Installation: Netborder
                    Configuration

---

Physical Port Detection

Depending on the physical orientation of the Sangoma card in the server, it may be difficult to identify the port order when plugging in the pstn lines.  The Wanpipe driver has a built in utility that illuminates individual lights for each port

Click HERE for details on usage and operation

* Note: This port detection feature currently only supports our T1/E1 cards

 

---

 

RJ45 T1/E1 Pinouts

Pin	Signal	Pin	Signal
1	RRING	4	TRING
2	RTIP	5	TTIP

-> RJ-45 Description
-> Straight Thru Cable
-> Cross-over Cable
-> Loop Back Plug

---

Firmware Update

-> Linux: Firmware update

-> Windows: Firmware Update