A102 Dual Voice and Data Card

    1. Introduction
    2. Wanpipe Driver Download
    3. Installation & Configuration
    4. Physical Port Detection
    5. RJ45 T1/E1 Pinouts
    6. Firmware update

    a102.jpg

                      

    -> View Demo
    -> Technical spec

     


     

    Introduction

     

    • Two ports of optimized voice and data over T1, E1, and J1 available with Telco-grade hardware echo cancellation.
    • The A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines
    • Supports Asterisk®, FreeSwitchas well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
    • Line Protocol Support: Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC
    • uses Wanpipe Driver which includes a suite of configuration, operation and debugging utilities



    Wanpipe Driver Download
    ------

    -> Linux: Wanpipe Driver

    -> Windows: Wanpipe Driver


    Installation and Configuration

     

    Linux:     -> Asterisk
                   -> FreeSWITCH
                   -> API support: Voice API, Wan IP, Multi-Link PPP, HDLC, X25
                   -> Netborder

    Windows: -> Installation: Netborder
                        Configuration


    Physical Port Detection

    Depending on the physical orientation of the Sangoma card in the server, it may be difficult to identify the port order when plugging in the pstn lines.  The Wanpipe driver has a built in utility that illuminates individual lights for each port

    Click HERE for details on usage and operation

    * Note: This port detection feature currently only supports our T1/E1 cards



    RJ45 T1/E1 Pinouts

    PinSignalPinSignal
    1 RRING 4 TRING
    2 RTIP 5 TTIP


    -> RJ-45 Description
    -> Straight Thru Cable
    -> Cross-over Cable
    -> Loop Back Plug


    Firmware Update

    -> Linux: Firmware update

    -> Windows: Firmware Update